It’s never been easier to start your adventure with the Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit. This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go! This Slimsport Roof Rack is ready to play.
Upgrade or change your Slimsport Rack Tray configuration at any time by adding the RACK ACCESSORIES or explore them later when a new adventure calls.
- This low-profile flat deck Slimsport rack has a load carrying area of 1272mmL (50.07") x 1185mmW (46.65").
- The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
- The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
- Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket (sold separately).
- Easily add on the Slimsport Side Mount Accessory Bracket / Small – by Front Runner (sold separately) for all Front Runner side mount accessories.
- The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
- Need a lightbar? The optional Toyota Tacoma (2005-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount (sold separately).
- Fitment guide and all mounting hardware included.
- 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
- No drilling required.
- Note: The Sunroof Tilt/Vent function does not work with TRD PRO and models fitted with sunroof. The sunroof can still be retracted/fully opened.
- Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Consisting of:
1 x Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit
Installation Hardware
Fitting Instructions
Material Used:
Black epoxy powder - coated T6 aluminum
High strength steel
Assembled Rack Kit Dimensions:
1398mm (55") L x 1141mm (44.9") W x 106mm (4.2") H
Approximate Installed Weight: 26.57kg (58.58lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 26.57kg (58lbs)
Selected page contains no content. Add content to this page in the page editor.
Selected page contains no content. Add content to this page in the page editor.
It’s never been easier to start your adventure with the Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit. This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go! This Slimsport Roof Rack is ready to play.
Upgrade or change your Slimsport Rack Tray configuration at any time by adding the RACK ACCESSORIES or explore them later when a new adventure calls.
- This low-profile flat deck Slimsport rack has a load carrying area of 1272mmL (50.07") x 1185mmW (46.65").
- The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
- The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
- Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket (sold separately).
- Easily add on the Slimsport Side Mount Accessory Bracket / Small – by Front Runner (sold separately) for all Front Runner side mount accessories.
- The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
- Need a lightbar? The optional Toyota Tacoma (2005-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount (sold separately).
- Fitment guide and all mounting hardware included.
- 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
- No drilling required.
- Note: The Sunroof Tilt/Vent function does not work with TRD PRO and models fitted with sunroof. The sunroof can still be retracted/fully opened.
- Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Consisting of:
1 x Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit
Installation Hardware
Fitting Instructions
Material Used:
Black epoxy powder - coated T6 aluminum
High strength steel
Assembled Rack Kit Dimensions:
1398mm (55") L x 1141mm (44.9") W x 106mm (4.2") H
Approximate Installed Weight: 26.57kg (58.58lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 26.57kg (58lbs)
Selected page contains no content. Add content to this page in the page editor.
Selected page contains no content. Add content to this page in the page editor.