These frame support brackets use the existing factory bumper mounts, but wrap around and tie into the front sway bar mounts, which better distributes the load when winching or performing a vehicle recovery. Although optional, we highly recommend these brackets if you plan to do any winching. These brackets specifically fit our Hi-Lite Tacoma Hi-Lite Overland Front Bumper [No Bull Bar] and Hi-Lite Tacoma Overland Front Bumper [Bull Bar].
Can be installed before or after bumper is installed
Sold as a pair
Includes hardware kit
Made to use with our Hi-Lite Tacoma Front Bumper
All brackets come powder coated
Made in the USA
FREE SHIPPING!
$40 in savings!
(Lower 48 states only)
Install Instructions
If you have your factory front sway bar, these brackets simply sandwich in between the frame and the sway bar while wrapping around to the studs on the factory front bumper mounts.
Remove the 4 factory bolts from your sway bar (2 per side).
Remove the 4 factory nuts from the factory bumper mounts (2 each side).
Place the brackets in position on each side by lining up the holes in the bracket with the studs from the factory bumper mount. The bracket will then wrap around to where the sway bar was mounted to the frame.
After the brackets are in place, loosely install the 4 factory nuts back onto the studs of the factory bumper mounts (2 nuts each side).
Next, line up the 2 holes on the sway bar back over the new frame support bracket, and install the 2 new supplied sway bar bolts (repeat on other side).
Make sure everything is adjusted properly and the frame support brackets are sandwiched between the frame and the sway bar, and tighten down all hardware. Please reference our photos to insure a correct fit.
*You may need to slightly trim your plastic fender liner to allow clearance for the bracket.
*If you have an aftermarket suspension that incorporates a shock reservoir bracket into the sway bar brackets, you may have to purchase slightly longer bolts in order to sandwich the bracket or you may need to modify the bracket itself depending on your specific suspension setup.
***THIS PRODUCT IS MADE FOR OFFROAD USE ONLY***
Description
Toyota Tacoma Front Bumper Support Brackets
These frame support brackets use the existing factory bumper mounts, but wrap around and tie into the front sway bar mounts, which better distributes the load when winching or performing a vehicle recovery. Although optional, we highly recommend these brackets if you plan to do any winching. These brackets specifically fit our Hi-Lite Tacoma Hi-Lite Overland Front Bumper [No Bull Bar] and Hi-Lite Tacoma Overland Front Bumper [Bull Bar].
Can be installed before or after bumper is installed
Sold as a pair
Includes hardware kit
Made to use with our Hi-Lite Tacoma Front Bumper
All brackets come powder coated
Made in the USA
FREE SHIPPING!
$40 in savings!
(Lower 48 states only)
Install Instructions
If you have your factory front sway bar, these brackets simply sandwich in between the frame and the sway bar while wrapping around to the studs on the factory front bumper mounts.
Remove the 4 factory bolts from your sway bar (2 per side).
Remove the 4 factory nuts from the factory bumper mounts (2 each side).
Place the brackets in position on each side by lining up the holes in the bracket with the studs from the factory bumper mount. The bracket will then wrap around to where the sway bar was mounted to the frame.
After the brackets are in place, loosely install the 4 factory nuts back onto the studs of the factory bumper mounts (2 nuts each side).
Next, line up the 2 holes on the sway bar back over the new frame support bracket, and install the 2 new supplied sway bar bolts (repeat on other side).
Make sure everything is adjusted properly and the frame support brackets are sandwiched between the frame and the sway bar, and tighten down all hardware. Please reference our photos to insure a correct fit.
*You may need to slightly trim your plastic fender liner to allow clearance for the bracket.
*If you have an aftermarket suspension that incorporates a shock reservoir bracket into the sway bar brackets, you may have to purchase slightly longer bolts in order to sandwich the bracket or you may need to modify the bracket itself depending on your specific suspension setup.
***THIS PRODUCT IS MADE FOR OFFROAD USE ONLY***
From adventurers who trust our gear
What Overlanders Say
Bought items from them online. First time buying from Artemis. They got awesome customer service and kept me updated with emails. Fast shipping as well. A+ all around for me.
Daniel S
Absolutely love the KOVEA Mini stove I purchased! They are great to work with and I’ll definitely buy from Artemis again.
Northology Adventures
Unbelievably fast shipping and attentive service. I expected 8-12 weeks for delivery, but the order was shipped the next day and arrived within 3 days! Best buying experience that I can recall, and the Gazelle T8 tent is spectacular.
Jeremy Cyr
Absolutely, hands down, the best customer service I have experienced to date. And a quality product to stand behind. I ordered aluminum traction boards from them recently and they are exactly what I was looking for. Very excited to find a solid vendor, I will be buying from them again.
Rockford Regan
Artemis Hardware delivered exactly what they promised, an exceptionally high-quality product, at a very good price. They provide an exceptional value and I would gladly shop here again.
Meet the Infinity Tool: The wearable, adaptable companion for life's adventures. This sleek utility bracelet doubles as a versatile gear strap designed so you can do more with what's at hand. From ...
The 36" Perfect Bungee Adjust-a-Strap Adjustable Bungee Strap is the most versatile adjustable bungee strap worldwide and now comes with 4 straps in a reusable bag. Featuring two glass-reinforced i...
Fits All Military Canteens Including 1 2 & 5 Qt Models , Clip Holds Valve In Position For On-the-go Hydration , 3 Foot Drinking Hose
Fits All Military Canteens Including 1 2 & 5 Qt Models ,...
 The Dynalite 3-Person Tent Footprint is a protective ground tarp designed specifically for the Near Zero Dynalite 3-Person Backpacking Tent. It enhances durability, shields the tent floor from ...
Wavian 22L Water Can
Experience the unmatched toughness and skillful construction of Wavian's fresh, premium plastic canteens. These non-toxic, edibles-safe, and sun-ray-tolerant canteens are maste...
This heavy-duty Wavian metal holder is the perfect option for securely holding your Wavian 20L Jerry Can. With its wider back support, you can trust that your fuel or water can is safe and sound wh...
Be prepared and ready with our MOLLE Tactical Trauma Kit. This military medical pouch includes over 40 essential emergency items, and features a full-length, two-way zipper for quick and easy acces...
Rothco’s Fast Access Tactical Trauma Kit is your go-to solution for emergency preparedness, packed with over 80 essential first aid supplies in a durable and versatile Tactical Convertipack. The me...
Description
The Yankum 2-Ply Flat Strap is an extremely capable piece of recovery equipment. Flat straps are a must have and typically the first recovery product most people buy for their vehicle ...
DUE TO HIGH DEMAND THE 3" X 20' FLAT STRAP IS CURRENTLY ON BACK ORDER. EXPECTED FULFILLMENT DATE APRIL 25TH
Description
The Yankum 2-Ply Flat Strap is an extremely capable piece of recovery equipme...
Big cosmic powers, itty bitty living space. Our all-new MyFAK Mini First Aid Kit comes equipped with high-performance life-saving supplies in our most compact MyFAK yet. When compact is key, the My...
Sold out variants are expected to be back in stock until March 2025.Â
The Wavian Fuel Can, also known as the original NATO Steel Jerry Can, has been trusted for over 75 years by numerous countries....
Order Quantity 1 = 1 Ring Â
For use with synthetic HMPE winch line ONLY
WARNING:Â When performing a winch recovery, start with a single line pull (1:1), and work up to other configurations, ie 2:1 ...
Our new ready to go ultimate kit. Everything you need for recoveries plus the bag!Â
We compared ropes on the market and found deficiencies in many of them. So we developed our own ropes! Don't beli...
LYNX IFAK Stage 1 – Core Trauma Essentials in a Compact, Life-Saving Kit
The LYNX IFAK Stage 1 is built for one purpose: to stop traumatic bleeding fast and buy critical time when seconds matter mo...
This waterproof, dustproof, and crushproof first aid kit is equipped with life-saving supplies for any environment. Whether in the desert, on the boat, or in the mud, your gear will stay protected...
LYNX TrailGuard Survival Kit – Be Ready for the Unknown
Your All-in-One Compact Survival Solution
The LYNX TrailGuard Survival Kit is a self-contained survival system built for off-roaders, overlan...
Select the Recovery Kit That's Best for You
Essential:
1 Red Kinetic recovery rope 5/8" X 20'
2 Red Soft shackle 5/16"
1 Bag Small
Weekender:
1 Red Kinetic recovery rope 5/8" X 20'
2 Red Soft ...
 The Dynalite 3-Person Backpacking Tent is a lightweight, freestanding shelter designed for three occupants or two campers with extra gear. Offering high-performance materials, ample storage, and c...
Off-Road Recovery Kit for 3/4 to 1-Ton Trucks
Remember to pair the recovery rope with the recovery vehicle, NOT the stuck vehicle.
Select the Recovery Kit That's Best for You
Essential:
1 Kinetic...
*NOTE*Â MUST SHIP VIA GROUND DUE TO DANGEROUS GOODS (LITHIUM BATTERIES, MATCHES)
By purchasing the LYNX Go-Bag, you save 15% compared to buying the components individually at retail pricing.
Introd...
Subscribe to our newsletter
Promotions, new products and sales. Directly to your inbox.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
