Designed, tested and made in Australia, the New 75W Lightforce Venom LED increases driver safety and reduces fatigue with a clear 5000K beam of 850m @ 1 LUX.
The sleek design of Venom LED makes it ideal for mounting in locations where space is at a premium. Weighing in at a mere 1.2kg with only a 66mm footprint, Venom LED is easy to accommodate and packed full of features. With the addition of radio suppression technology, independently certified to the internationally recognised standard CISPR25 Venom LED will reduce interference with broadcast radio reception on low signal strength locations a vital function for travel in regional and remote locations.
The 75W Venom LED has the highest attainable IP69K rating to protect against moisture and contaminant ingress, pressure die cast aluminum housing and bezel, and is finished with a hardwearing UV stable powder coat. Complete with the Lightforce reputation for quality and a trusted three-year warranty, Venom LED is built to last.
Venom LED is completely compatible with the Lightforce range of modular filters and with the addition of combo filters a spread of up to 120m wide can be achieved. With a selection of colours available users can customise the light to suit their unique needs.
Nothing can hold the powerful Venom LED back, and it won’t hold you back, with its compact size allowing for the addition of all the accessories that you need to optimise your daily drive and epic 4WD adventures.
75W LED within a 150mm housing
21 x Lumileds LEDs provide generous distance
3 Stage Operation: switch from full intensity, to day time or night time positioning with the simple push of a button
CISPR25 compliant reducing radio frequency interference
Cast aluminium housing and bezel
Hard-wearing UV stable Powder coat finish
High current waterproof connector
Reverse polarity voltage protection
IP69K rated to protect against moisture / contaminant ingress. Totally dust tight & resistant to close range, high pressure, high temperature spray downs
Genuine Gore® Waterproof Membrane with Mechanical Seal
Thermal overload protection
Impact resistant Polycarbonate filter
3 year warranty
Power: 75 Watts
Raw lumens: 7850lm
Effective lumens: 4407lm
Input voltage range: 10-32V
Current draw: 5.7 Amps @ 13.2V
LED colour temperature: 5000K
LED lifespan: 50,000 hours
Input cable length: 460mm
Operating temperature: -40°C to 63°C
Weight including bracket: 1.2kg
1 x Spot filter
1 x Bottom mounting bracket (fitted to light)
1 x 4 pin high current waterproof harness adaptor
2 x M10 x 35mm stainless steel hex bolt with Nordlock washers and nyloc nuts (side bolts fitted to light)
1 x M10 x 35mm stainless steel hex bolt with washer and nyloc nut (fitted to bracket for mounting)
2 x 1/4" x 1 x 1/4" long UNC stainless steel hex bolt with washer and nut (in bag)