Tire condition is critical for the safety of riders and drivers. If there is a problem, receiving a warning before it’s too late is a life saver. The BLU TPMS External Tire Pressure Monitoring System monitors both the pressure and temperature of vehicle tires.
These high quality O.E.M. grade low energy Bluetooth (BLE) sensors monitor important tire parameters; Communicating this information to the free iOS or Android mobile app in near real-time. Push Notifications activate when tire pressure or temperature deviate from their pre-defined settings; no dedicated display required.
Some things to consider prior to making a purchase…
In an effort to conserve battery life, these sensors enter a ‘sleep-state’ after a few minutes of no vehicle movement and consequently will stop transmitting data to the app. They will wake up and begin transmitting once the vehicle is underway, typically within 30 seconds.
Due to variations in electronic tolerances, certain 100 psi labeled sensors are unable to resolve pressures above 90-92 psi and as a result will report 0 psi. if your tires have an operational pressure at or above 90 psi.
Systems are available in 2 wheel (Motorcycle), 4 wheel sets.
Each sensor measures approximately 0.97” x 0.97” x 0.767”.
Other features:
Free app download for iOS or Android devices
Store up to 99 vehicles on one app account
Optional USB Audio Alert Module pairs with most modern vehicle audio systems. Will audibly announce when tire pressure or temperature go outside of preset parameters.
Important Safety Information
Our BLU TPMS External Sensors are installed on the end of the air valve stem, replacing the standard valve cap. These sensors require .75″ clearance when spinning on your wheel. If installing on a motorcycle, please verify that these sensors will not come in contact with your brake calipers or any wheel components. Wheels that have 90 degree, 45 degree or off-center/off-set air valve stems are especially vulnerable. Sensors with improper clearance can be damaged and/or destroyed and will void product warranty. This is dangerous to riders and passengers as it could affect the condition of your air valve stem potentially resulting in loss of tire pressure.
Selected page contains no content. Add content to this page in the page editor.
Selected page contains no content. Add content to this page in the page editor.
Tire condition is critical for the safety of riders and drivers. If there is a problem, receiving a warning before it’s too late is a life saver. The BLU TPMS External Tire Pressure Monitoring System monitors both the pressure and temperature of vehicle tires.
These high quality O.E.M. grade low energy Bluetooth (BLE) sensors monitor important tire parameters; Communicating this information to the free iOS or Android mobile app in near real-time. Push Notifications activate when tire pressure or temperature deviate from their pre-defined settings; no dedicated display required.
Some things to consider prior to making a purchase…
In an effort to conserve battery life, these sensors enter a ‘sleep-state’ after a few minutes of no vehicle movement and consequently will stop transmitting data to the app. They will wake up and begin transmitting once the vehicle is underway, typically within 30 seconds.
Due to variations in electronic tolerances, certain 100 psi labeled sensors are unable to resolve pressures above 90-92 psi and as a result will report 0 psi. if your tires have an operational pressure at or above 90 psi.
Systems are available in 2 wheel (Motorcycle), 4 wheel sets.
Each sensor measures approximately 0.97” x 0.97” x 0.767”.
Other features:
Free app download for iOS or Android devices
Store up to 99 vehicles on one app account
Optional USB Audio Alert Module pairs with most modern vehicle audio systems. Will audibly announce when tire pressure or temperature go outside of preset parameters.
Important Safety Information
Our BLU TPMS External Sensors are installed on the end of the air valve stem, replacing the standard valve cap. These sensors require .75″ clearance when spinning on your wheel. If installing on a motorcycle, please verify that these sensors will not come in contact with your brake calipers or any wheel components. Wheels that have 90 degree, 45 degree or off-center/off-set air valve stems are especially vulnerable. Sensors with improper clearance can be damaged and/or destroyed and will void product warranty. This is dangerous to riders and passengers as it could affect the condition of your air valve stem potentially resulting in loss of tire pressure.
Selected page contains no content. Add content to this page in the page editor.
Selected page contains no content. Add content to this page in the page editor.